Classic Bevel (12 Tiles Per Box)

Nifty Tiles are premium self-adhesive wall tiles designed for the modern homeowner who wants designer results without designer prices or contractor headaches. Each tile features our proprietary **3D Resin Surface Technology**—a raised, textured surface that captures and reflects light exactly like real glazed ceramic. Unlike cheap alternatives that yellow and crack, our tiles are built to last with:

• Heat-resistant polymer adhesive (tested to 180°F)
• Humidity-proof design (85% humidity tested)
• Renter-safe removal technology
• Professional-grade 3D texture

Our customers' most common comment is:"My guests had to touch them to believe they weren't real tile!"The secret is our **3D Resin Surface Technology**. While flat vinyl stickers look obviously fake, our raised texture creates the same light reflection and visual depth as authentic ceramic. The difference lies in the details: Nifty Tiles are lighter, easier to install, and cost 70% less than traditional tile plus professional installation.

Unlike competitors that fail in real-world conditions, Nifty Tiles are specifically engineered for kitchen and bathroom environments:

Heat Performance

Laboratory-tested to 180°F- Our Heat-Tested Polymer Adhesive maintains bond strength even behind stovetops and near ovens. Proper installation ensures optimal performance.

Humidity Resistance

Tested to 85% humidity- Perfect for steamy bathrooms and high-moisture areas where other brands fail.

Water Protection

Splash and spill resistant- Handles everyday kitchen and bathroom water exposure. Not recommended for direct water immersion (like inside showers).

Nifty Tiles are engineered for long-term durability, but proper installation is key:Surface Preparation (Critical):

• Clean with TSP (trisodium phosphate) degreaser—dish soap leaves residue that compromises adhesion
• Wait 72 hours after priming, 21 days after painting
• Ensure surface is completely smooth and dry

Maintenance:

• Clean with soft sponge and warm water
• Use mild cleaners like dish soap or glass cleaner
• Avoid abrasive scrubbers or harsh chemicals

Follow these simple steps and your Nifty Tiles will look perfect for years to come.

Getting the right quantity is crucial for your project timeline and budget:Step 1: Measure Your SpaceMeasure width and height of each area to be covered. For irregular shapes, divide into rectangles and measure separately.Step 2: Use Our Smart CalculatorVisit any product page and use our built-in tile calculator. Simply enter your measurements and get an instant estimate.Pro Tip:Our calculator automatically adds 10% extra tiles to account for cuts, mistakes, and future repairs. This ensures you have everything needed to complete your project perfectly.

Critical Success Factor:90% of adhesion failures are due to poor surface preparation. Follow these steps exactly for guaranteed results.Step 1: Clean ThoroughlyUse TSP (trisodium phosphate) degreaser to remove all dust, grease, and residue. Never use dish soap—it leaves a film that compromises adhesion.Step 2: Smooth Any ImperfectionsFill gaps between panels with plaster. Sand smooth when dry.Step 3: Prime or Wait

• New primer: Wait 72 hours before installation
• Fresh paint: Wait 21 days for complete curing

Renter-Safe Installation Tip

Our tiles work perfectly on properly prepared painted walls and remove cleanly with gentle heat. Follow preparation steps exactly to ensure damage-free removal later.

Safety First:Always turn off power at the breaker before starting.Installation Steps:

1. Measure the outlet location and transfer measurements to the tile
2. Use a sharp utility knife to cut the opening
3. Install the tile, ensuring snug fit around the outlet
4. Replace outlet cover once complete

Renter-Safe Removal System

This is where Nifty Tiles truly shine. Our proprietary adhesive is engineered to stick permanently but release cleanly with gentle heat.Damage-Free Removal Process:

1. Use a hairdryer to warm each tile for 30-60 seconds
2. Gently lift from corners—the adhesive softens with heat
3. Clean any residue with warm, soapy water
4. No damage to paint or drywall when done correctly

Absolutely! This is where our **Heat-Tested Polymer Adhesive** really shines.Installation Requirements:

• Leave 8-inch safety zone if no rear control panel
• Maintain 2-inch clearance from countertop appliances
• Ensure proper ventilation to avoid direct steam exposure

Yes! Installing over existing smooth tile is one of our most popular applications.Requirements:

• Existing tile must be smooth and texture-free
• Clean thoroughly with TSP degreaser
• Consider grout line depth for final appearance

Pro Tip:Test with one tile first to ensure the pattern works with your existing grout lines. Some textured tiles may show through - we recommend testing before full installation.

Special Section: Renter-Friendly Installation

Nifty Tiles are the perfect solution for personalizing rental spaces without risking your security deposit. Our renter-safe removal system ensures clean, damage-free removal when it's time to move.Renter Success Tips:

• Always test removal in an inconspicuous area first
• Follow our heating removal method exactly
• Take before photos for your records
• Keep installation instructions for future reference

Our Heat-Tested Polymer Adhesive requires smooth surfaces for optimal bonding:Avoid These Surfaces:

• Textured walls (popcorn, orange peel, etc.)
• Unpainted drywall
• Raw/porous wood
• Textured ceramic tiles
• Brick or stone
• Inside shower stalls
• Outdoor applications

Nifty Tiles work perfectly on properly prepared smooth surfaces:Ideal Surfaces:

• Painted drywall (21+ days after painting)
• Smooth ceramic tile
• Acrylic wall panels
• Wall linoleum
• Mirror surfaces
• Smooth wallpaper

Surface Preparation Key:The surface must be smooth, clean, and completely dry.